FID Specification

FEA

FEATURES

INDICATES:

The lines and other features of each key telephone in a key system.

DATE:

10/31/2014

BILLING:

CRIS

APPLICATIONS:

General Purpose

SECTION - POSITION	EXAMPLES
S&E - FL
	Six button telephone with three Identification Format I1 @@A/TN 732 555-1234/FEA W 1440-1442 Intercommunication feature used to identify the intercom number I1 @@A/TN 732 555-1234/FEA W 8304-8306, 6301,6309; COML 11 /ROL C Intercommunication feature used line appears I1 @@A/tn 732 555-1234/FEA L 1440-1442; COML A2; COML B27 Signal feature used to identify three stations G1 STA D I1 @@A/TN 732 555-1234/FEA L 1450-1452; S A, B, C; Z A; Z B2 Signal feature used to identify two signaling circuits G1 STA A I1 @@A/TN 732 555-1234/FEA L 1440-1443; S C; S D2; Z D, C Signal feature used to identify from two stations G1 STA C I1 @@A/TN 732 555-1234/FEA L 1440-1443; S A, B; Z D, A Cutoff feature used to cut off stations A and B I1 @@A/TN 732 555-1234/FEA L 7750-7752; C (STA A & B) Cutoff feature used to cut off only a bell I1 @@AL 7750-7752; C/FEA L 7750-7752; C (BELL)/ROL 7750 Cutoff feature used to cut off a specific line on selected stations I1 @@A/TN 732 555-1234/FEA L 7750-7752; C 7750 (STA A & B) Add on feature used for a conference arrangement I1 @@A/TN 732 555-1234/FEA H 7750-7752; A 7750 CONF 7751 Exclusion feature used for a simple switchhook-type exclusion I1 @@A/TN 732 555-1234/FEA H 7750-7752; E 7750 (STA C & B) Transfer feature used to transfer calls to the PBX Attendant I1 @@A/TN 732 555-1234/FEA L 7750-7752; T PBX ATTENDANT Transfer feature used to transfer calls to a specific telephone number I1 @@A/TN 732 555-1234/FEA L 7750-7752; T 7799 Key-in-use feature used to indicate monitor control key I1 @@A/TN 732 555-1234/FEA HM 1440-1442; K Paging feature used to identify the paging zone(s) I1 @@A/TN 732 555-1234/FEA PA 2

FID RULES/CONSTRAINTS:

At sign indicates change and deletion activity. Plus sign indicates addition and rearrangement activity.
All combinations of Elements 21, 22, 23 and 24 or 25 are allowed with the various Line Identification element combinations (TN, CLS, CLT, etc.) listed in the Element Combination Chart.

SERVICE ORDER ACTIVITY NOTES:

If rates vary for different types of cutoff arrangements, the appropriate USOC must appear followed by the Feature Indicator C and related data.

If add on arrangements more complex than conference are to be expressed, the appropriate USOC must appear followed by the Feature Indicator A and related data.
To help the installer identify the work and to simplify the logic for determining charges, a plus sign (+) is used to indicate addition, and an at sign (@) is used to indicate change and deletion activity.

To indicate a line termination(s) being removed, an at sign (@) is placed immediately in front of the station numbers(s) in the descriptive information that follows C (change) action codes.

To identify line terminations being worked on (rearranged or added), a plus sign (+) is placed immediately in front of the station number(s) that follows T (change to activity) action codes and X (change to and move activity) action codes
Examples of order entries follow:

Line 7753 is being substituted for line 7752
G2   STA A/LOC DES SECY
C1   @@Z/FEA P 7750, 7751, @7752
T1   @@Z/FEA P 7750, 7751, +7753

Line 7751 and 7752 are being removed, Line 7754 is being added
G2 STA A/LOC DES SECY
C1 @@Z/FEA P 7750, @7751, @7752
T1 @@Z/FEA P 7750, +7754

Rearrangement of existing stations
G2  STA/A LOC DES SECY
C1  @@Z/FEA P 7750, @7751, @7752
T1  @@Z/FEA P 7750, +7752, +7751

Line 7753 is being added
G2   STA A/LOC DES SECY
C1   @@Z/FEA P 7750-7752
T1   @@Z/FEA P 7750-7752, +7753

SECTION - POSITION	APPEARANCE	MODE	MIN	MAX
S&E - FL	Required	Alphanumeric	3	72

Element: 1

Feature Indicator

Appearance	Mode	Min	Max	Series	Range
Required	Alphabetic	1	4	No	No

Code Set:

Code	Meaning
P	Pickup Only
I	Pickup with illumination
H	Hold and pickup
L	Hold and pickup with illumination
W	Hold and pickup with wink-hold illumination
M	Monitor only
PM	Pickup and monitor
IM	Pickup with illumination and monitor
HM	Hold, pickup and monitor
LM	Hold, pickup with illumination and monitor
WM	Hold, pickup with wink-hold illumination and monitor
MI	Monitor only with line illumination
MV	Monitor only with visual set busy signal
V	Visual set busy signal
COML	Intercommunication
S	Signal, Internal
SX	Signal, External
Z	Buzzer
C	Cutoff
A	Add-on
E	Exclusion
T	Transfer
K	Key-in-use
PA	Paging

Element Rules:

All the Feature Indicators, except K and PA, must be associated with additional information as described in the following elements.

Element: 2

Numbering Plan Area Code

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	3	3	No	No

Reference:

See iconectiv LERG Routing Guide for complete list.

Element Rules:

NPA is required when it cannot be derived first from the NPA previously entered on the same logical line, second from the fielded TN, or third from the fielded EX in the Identification section.

Element: 3

Line Identification Central Office Code

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	3	4	No	No

Symbols:

At Sign, Plus Sign

Reference:

See iconectiv LERG Routing Guide for complete list.

Element Rules:

Required when Telephone Number Format is used with Feature Indicators P, I, H, L, W, M, PM, IM, HM, LM, WM, MI, MV and COML.

Element: 4

Line Identification Line Number

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	4	5	No	No

Data Parameters:

0000-9999

Symbols:

At Sign, Plus Sign

Element Rules:

Required when Telephone Number Format is used with Feature Indicators P, I, H, L, W, M, PM, IM, HM, LM, WM, MI, MV and COML.

Element: 5

Line Identification Prefix

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	3	No	No

Symbols:

At Sign, Plus Sign

Reference:

See BR 795-402-100 for complete list.

Element: 6

Line Identification Service Code

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	2	3	No	No

Symbols:

At Sign, Plus Sign

Reference:

See BR 795-402-100 for complete list.

Element Rules:

Required when Circuit Number Format is used with Feature Indicators P, I, H, L, W, M, PM, IM, HM, LM, WM, MI, MV and COML.

Element: 7

Line Identification First Modifier

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	2	No	No

Data Parameters:

A-Z

Symbols:

At Sign, Plus Sign

Element Rules:

Required when Circuit Number Format is used with Feature Indicators P, I, H, L, W, M, PM, IM, HM, LM, WM, MI, MV and COML.

Element: 8

CLCI Second Modifier

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic or Numeric	1	1	No	No

Reference:

See BR 795-402-100 for complete list.

Element: 9

Line Identification Serial Number

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	7	No	No

Data Parameters:

1-999999

Symbols:

At Sign, Plus Sign

Element Rules:

Required when Circuit Number Format is used with Feature Indicators P, I, H, L, W, M, PM, IM, HM, LM, WM, MI, MV and COML.

Element: 10

Line Identification Suffix

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	4	No	No

Data Parameters:

1-999

Symbols:

At Sign, Plus Sign

Element: 11

Line Identification Assigning Company Identification

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	2	5	No	No

Symbols:

At Sign, Plus Sign

Reference:

See BR 751-100-112 for complete list.

Element Rules:

Required when Circuit Number Format is used with Feature Indicators P, I, H, L, W, M, PM, IM, HM, LM, WM, MI, MV and COML.

Element: 12

Line Identification Segment

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	4	No	No

Data Parameters:

A-ZZZ
or
1-999

Symbols:

At Sign, Plus Sign

Element: 13

Line Identification Extension Number or Trunk Identifier

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	2	6	No	No

Data Parameters:

D1-D9999	When Primary Line Identifier includes the Direct Inward Dialing (DID) FID
F1-F9999	Indicates Simulated Facility Number (SFN)
G1-G9999	When Primary Line Identifier includes the Outgoing Only Service (OGO) FID
P1-P9999	When Primary Line Identifier includes the Private Branch Exchange (PBX) Station Number ( PX ) FID.
S1-S9999	When Primary Line Identifier includes the Special Identifying Telephone Number Supplement (SIS) and Special Identifying Telephone Number (SIT ) FIDs
T0-T4999, T6952-T9999	When Primary Line Identifier includes the Terminal Number - Multiline Group (TER) FID
T5000-T6951	When Primary Line Identifier includes the Two-Way Trunk Member Number (TWT ) FID
X1-X9999	When Primary Line Identifier includes the Extra Number ( XN ) FID.

Symbols:

At Sign, Plus Sign

Element Rules:

Common Language Practice BR 795-402-100 defines this element as 1-5 alphas, numerics,or alphanumerics. The above Data Parameters have been defined to meet provisioning requirements.

Required for unique identification when Extension Number or Trunk Code is present.

Although Common Language Practice BR 795-402-100 supports this element in series and range, the application of the element within this FID does not.

When a simulated facility number is used, the Assignment Not Required (ANR) FID is required.

Element: 14

Line Identification PX Station Line Indicator

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	2	2	No	No

Code Set:

Code	Meaning
PX

Symbols:

At Sign, Plus Sign

Element Rules:

Required when PBX Station Line Number Format is used with Feature Indicators P, I, H, L, W, M, PM, IM, HM, LM, WM, MI, MV and COML.

Element: 15

Line Identification PX Station Line Number

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	4	No	No

Data Parameters:

1-9999

Symbols:

At Sign, Plus Sign

Element Rules:

Required when PBX Station Line Number Format is used with Feature Indicators P, I, H, L, W, M, PM, IM, HM, LM, WM, MI, MV and COML.

Element: 16

Line Identification Terminal Number Multiline Group

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	5	No	No

Data Parameters:

1-2047	1AESS Hunting Terminals or multiline non-hunt group terminals
3001-3999	1AESS Non-Hunting terminals
0-255	2ESS Non-Hunting terminals must have numbers higher than any Hunting Terminals in the Multiline Group

Symbols:

At Sign, Plus Sign

Element Rules:

3ESS Hunting Terminals are not applicable to Non-Hunting Terminals

Required when Terminal Number Format is used with Feature Indicators P, I, H, L, W, M, PM, IM, HM, LM, WM, MI, MV and COML.

Element: 17

Line Identification Intercommunication Number

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	3	No	No

Data Parameters:

1-99

Symbols:

At Sign, Plus Sign

Element Rules:

Required when Intercommunications Number Format is used with Feature Indicators P, I, H, L, W, M, PM, IM, HM, LM, WM, MI, MV and COML.

Element: 18

Line Identification Simple Numbering Plan Area Code

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	5	No	No

Data Parameters:

1-9999

Symbols:

At Sign, Plus Sign

Element Rules:

Required when Simple Numbering Plan Number Format is used with Feature Indicators P, I, H, L, W, M, PM, IM, HM, LM, WM, MI, MV and COML.

Element: 19

Line Identification Extra Number (Alphanumeric Format)-Number Group

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	1	2	No	No

Data Parameters:

A-Z	(excluding I and O) Number Groups 0-23 respectively
AA	Number Group 24

Element Rules:

Required when Extra Number Format is used with Feature Indicators P, I, H, L, W, M, PM,

Element: 20

Line Identification Extra Number (Alphanumeric Format)-Number Group Designation

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	2	2	No	No

Data Parameters:

00-99

Element Rules:

Required when Extra Number Format is used with Feature Indicators P, I, H, L, W, M, PM

Element: 21

Line Identification Extra Number (Numeric Format)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	4	4	Yes	Yes

Data Parameters:

0000-9999

Element Rules:

Required when Extra Number Format is used with Feature Indicators P, I, H, L, W, M, PM

Element: 22

Line Designation

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	1	1	No	No

Element Rules:

This element is used with Feature Indicator COML when more than one intercom line appears at a station.

Element: 23

Station Identification

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	1	2	Yes	No

Element Rules:

This element is used with Feature Indicators S, SX, Z, C, E and T. When there is more than one signaling circuit per receiving station and it is necessary to indicate the signaling with which a button works, a number beginning with 2 follows the alphabetic entry. In this case, there is no separator between elements 4 and 5.

Element: 24

Descriptive Information

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	66	No	No

Symbols:

Ampersand, Left Parenthesis, Right Parenthesis, Space

Element Rules:

Ampersand separates two stations affected by a single C or E feature within parentheses. Parentheses encloses station and descriptive information related to C and E features.

Space separates data appearing before and after the ampersand and before and after the parentheses. This element is used with Feature indicators S, SX, Z, C, A, and T to provide such information as equipment or station identification and conference arrangements.

When there is more than one signaling circuit per receiving station and it is necessary to indicate the signaling with which a button works, a number beginning with 2 follows the alphabetic entry.

Element: 25

Paging Zone Identification

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic or Numeric	1	3	Yes	No

Code Set:

Code	Meaning
ALL	All paging zones
1-24

Element Rules:

This element is used with Feature indicator PA.

Elements 25 and 26 are mutually exclusive.

Element: 26

Paging Zone Override

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	2	3	No	No

Code Set:

Code	Meaning
OV	Paging Override
ALL	All paging zones

Element Rules:

This element is used with Feature indicator PA.

Elements 25 and 26 are mutually exclusive.

No.	Element Combination	Series	Separator
1.	1 SP 2 SP 3 - 4	No
2.	1 SP 3 - 4	No
3.	1 SP 5 . 6 7 8 SP 2 SP 3 - 4	No
4.	1 SP 5 . 6 7 8 SP 2 SP 3 - 4 . 12	No
5.	1 SP 5 . 6 7 8 SP 2 SP 3 - 4 . 13 . 12	No
6.	1 SP 5 . 6 7 8 . 9 . 10 . 11	No
7.	1 SP 5 . 6 7 8 . 9 . 10 . 11 . 12	No
8.	1 SP 5 . 6 7 8 . 9 . 11	No
9.	1 SP 5 . 6 7 8 . 9 . 11 . 12	No
10.	1 SP 6 7 8 SP 2 SP 3 - 4	No
11.	1 SP 6 7 8 SP 2 SP 3 - 4 . 12	No
12.	1 SP 6 7 8 SP 2 SP 3 - 4 . 13 . 12	No
13.	1 SP 6 7 8 . 9 . 10 . 11	No
14.	1 SP 6 7 8 . 9 . 10 . 11 . 12	No
15.	1 SP 6 7 8 . 9 . 11	No
16.	1 SP 6 7 8 . 9 . 11 . 12	No
17.	1 SP 14 SP 15	No
18.	1 SP 16	No
19.	1 SP 17	No
20.	1 SP 18	No
21.	1 SP 19 20	No
22.	1 SP 21	No

ORDER TYPE/ACTION CODE/FID RELATIONSHIPS

Order Section - Position: S&E - FL

Order Type	N	T	F	D	C	R	X	P	A
Presence	O	O	O	O	O	O	O	O	P
Action Codes	I,E	I,E	O,D	O,D	I,O, C,T, M,X, D,E, R	I,O, C,T, M,X, D,E, R	I,O, C,T, R	I	-

	CRIS	CABS
Data Retention	No	No
Printed on CSR	No	No

Note: Please refer to BR-751-000-150 for a complete description of a FID specification and its structure.

iconectiv Confidential - Restricted Access

This document and the confidential information it contains shall not be distributed, routed or made available to any third party, except with written permission of iconectiv.

Licensed Material - Property of iconectiv

Possession and/or use of this material is subject to the provisions of a written license agreement with iconectiv.