HPF

HUNTING-PREFERENTIAL LIST

INDICATES:

A specific stored program control switch hunting telephone number has a preferential hunt list and the preferential hunt sequence applicable.

DATE:

10/31/2014

BILLING:

CRIS and CABS

APPLICATIONS:

1AESS, Access Service, Access Service Request (ASR), DMS-100, EWSD, FETEX-150, STROM-DCO, TL1

SECTION - POSITION

EXAMPLES

S&E - LH

DMS-100
HPF  2-PLT 732 555-4309 TN 732 555-3956,
     5832, 5986


EWSD
HPF  3-PLT 555-7301 TN 555-7302
     OT 3 MBR 4, 1, 2

S&E - FL

TL1, 1AESS, FETEX-150, DCO
HPF series entry
I1   @@A/TER 4/TN 1768
     /HPF TER 3, 5, 9
     /HML 4

1AESS, TL1, FETEX-150, DCO
HPF series and range entry
I1   @@A/TER 10/TN 1768
     /HPF TER 8, 2-4, 6
     /HML 30

DMS-100
I1   @@A/TN 732 555-4309/HML 12/HPF 2
     /TLI 732 555-4300/TER 4


EWSD
I1   @@A/TER 3/HML 2/TLI 732 555-7301
     /TN 732 555-7302/HPF 3


I1   @@A/TER 4/HML 2/TLI 732 555-7301
     /HPF 3

FID RULES/CONSTRAINTS:

1. FIDs Hunting-Multiline Group Number (HML) and Hunting Type (HTY) are required entries in the same section for 1A and EWSD applications.
2. T, F, and X order types prohibited for Access Service application.
3. X action code prohibited on Access Service orders.

SERVICE ORDER ACTIVITY NOTES:

1. HPF is entered floating after the assignable USOC of the hunting telephone number which has a preferential hunt list, preceding or following any FIDs which float after this USOC.
2. Changes may occur in the preferential hunt list entry where:
   
   - a preferential hunt list is added to or deleted from a line
   
   - the sequence in a preferential hunt list is being changed
   
   - the hunting telephone number to which the preferential hunt list is assigned is being changed
3. 1AESS
   To show these changes on the service order, the USOC for the hunting telephone number which has the preferential hunt list is shown changed (C).  The change is reflected in the to (T) entry.  Each change (C) entry must precede its corresponding to (T) entry.  For example, when a preferential hunt list is added to a line, the service order appearance would be:
   HML  25-TER H1-10/HTY PF
   GI     HML 25
   C1    @@A/TER 4/TN 1768
   T1     @@A/TER 4/TN 1768
             /HPF TER 2, 6, 8
   
4. The data following floated HPF for 1A switch consists of the code set TER, followed by the terminal number of all additional hunted lines in the sequence in which they are to be hunted.  (The first line in the sequence is not entered).  1AESS permits a maximum of eighteen terminals in a preferential hunt list, including the first line.
5. DMS-100
   The data following the left hand HPF for the DMS-100 switch consists of the preferential hunting group number, the code set PLT (Pilot Telephone Number), followed by the pilot telephone number and all the additional hunted numbers in the sequence in which they are to be hunted.  The DMS-100 switch permits a maximum of 18 numbers in a preferential hunting list.
6. DMS-100, EWSD
   The data following the floated HPF for the DMS-100 and EWSD switches is the preferential hunting list number.  A maximum of 64 preferential hunting lists are allowed in the DMS-100 and EWSD switches.
7. DMS-100, EWSD
   The data following the left hand HPF consists of the preferential hunting group number, the code set of PLT (Pilot Telephone Number), followed by the pilot telephone number, the code set of TN (Telephone Number) followed by the telephone number which is assigned to the terminal that is the "owner" of the list, code set of OT (Owner Terminal) followed by the terminal (TER) number of the terminal that is the "owner" of the list, and code set of MBR (Member Terminal) followed by the terminal numbers of the other members of the list in the sequence in which they are to hunt.
8. TL1, EWSD
   EWSD and TL1 permit a maximum number of 18 terminals in a preferential hunting list.
9. FETEX-150, STROM-DCO
   FETEX-150 and STROM-DCO allow up to 50 terminals in a preferential hunting list.
   

REFERENCES:

1. TL1
   TR-NWT-000199, DNCT View, Keywords PRFHNT, PRFLST
2. EWSD
   Siemens 0625-00070, Preferential Multiline Hunting; Siemens 0770-00010
3. FETEX-150
   ES11X-1516-G72, Keywords PRFHNT, PRFLST
4. ATIS/OBF-ASR-002 and 003, HPF field

SECTION - POSITION

APPEARANCE

MODE

MIN

MAX

Required

Alphanumeric

17

46

Element: 1

Preferential Hunting List Number (DMS-100, EWSD)

Appearance

Mode

Min

Max

Series

Range

Required

Numeric

1

2

No

No

Data Parameters:

Element: 2

Indicator (DMS-100, EWSD)

Appearance

Mode

Min

Max

Series

Range

Required

Alphabetic

2

3

No

No

Code Set:

Element: 3

Pilot Numbering Plan Area Code (DMS-100)

Appearance

Mode

Min

Max

Series

Range

Optional

Numeric

3

3

No

No

Reference:

See iconectiv LERG Routing Guide for complete list.

Element Rules:

Required when different from that of the main account telephone number.

Element: 4

Pilot Central Office Code (DMS-100, EWSD)

Appearance

Mode

Min

Max

Series

Range

Optional

Numeric

3

3

No

No

Reference:

See iconectiv LERG Routing Guide for complete list.

Element Rules:

Required if different from that of the main account telephone number or the immediately preceding central office unit if used in a series.

Element: 5

Pilot Line Number (DMS-100, EWSD)

Appearance

Mode

Min

Max

Series

Range

Required

Numeric

4

4

No

No

Data Parameters:

Element: 6

Numbering Plan Area Code (DMS-100)

Appearance

Mode

Min

Max

Series

Range

Optional

Numeric

3

3

No

No

Reference:

See iconectiv LERG Routing Guide for complete list.

Element Rules:

Required when different from that of the main account telephone number.

Element: 7

Central Office Code (DMS-100, EWSD)

Appearance

Mode

Min

Max

Series

Range

Optional

Numeric

3

3

No

No

Reference:

See iconectiv LERG Routing Guide for complete list.

Element Rules:

Required if different from that of the main account telephone number or the immediately preceding central office unit if used in a series.

Element: 8

Line Number (DMS-100, EWSD)

Appearance

Mode

Min

Max

Series

Range

Optional

Numeric

4

4

18

No

Data Parameters:

Element: 9

Terminal Number (EWSD)

Appearance

Mode

Min

Max

Series

Range

Optional

Numeric

1

4

18

Yes

Data Parameters:

No.

Element Combination

Series

Separator

1.

1 - 2 SP 3 SP 4 - 5 SP 2 SP 6 SP 7 - 8

No

2.

1 - 2 SP 4 - 5 SP 2 SP 7 - 8

No

3.

1 - 2 SP 4 - 5 SP 2 SP 7 - 8 SP 2 SP 9 SP 2 SP 9

No

4.

1 - 2 SP 5 SP 2 SP 8

No

SECTION - POSITION

APPEARANCE

MODE

MIN

MAX

Required

Alphanumeric

1

8

Element: 1

Preferential Hunting List Number (DMS-100, EWSD)

Appearance

Mode

Min

Max

Series

Range

Optional

Numeric

1

2

No

No

Data Parameters:

Element: 2

Indicator (1AESS, TL1, FETEX-150, DCO)

Appearance

Mode

Min

Max

Series

Range

Optional

Alphabetic

3

3

No

No

Code Set:

Element: 3

Terminal Number (1AESS, TL1, FETEX-150, DCO)

Appearance

Mode

Min

Max

Series

Range

Optional

Numeric

1

4

18

Yes

Data Parameters:

No.

Element Combination

Series

Separator

1.

1

No

2.

2 SP 3

No

ORDER TYPE/ACTION CODE/FID RELATIONSHIPS

Order Type

N

T

F

D

C

R

X

P

A

Presence

O

O

O

O

O

O

O

P

P

Action Codes

I,E

I,E

O,D

O,D

I,O, D,E, R

I,O, D,E, R

I,O, R

-

-

CRIS

CABS

Data Retention

Yes

Yes

Printed on CSR

Yes

Yes

Order Type

N

T

F

D

C

R

X

P

A

Presence

O

O

O

O

O

O

O

P

P

Action Codes

I,E

I,E

O,D

O,D

I,O, C,T, D,E, M,X, R

I,O, C,T, D,E, M,X, R

C,T, R

-

-

CRIS

CABS

Data Retention

Yes

Yes

Printed on CSR

Yes

Yes

Note: Please refer to BR-751-000-150 for a complete description of a FID specification and its structure.

iconectiv Confidential - Restricted Access

This document and the confidential information it contains shall not be distributed, routed or made available to any third party, except with written permission of iconectiv.

Licensed Material - Property of iconectiv

Possession and/or use of this material is subject to the provisions of a written license agreement with iconectiv.