|
| 33 | Technician dispatched prior to due date to test line |
| BL | UNE associated with RT-based service (DLE-ADSL) |
| EL | Exclude loop from performance measurements and service guarantees |
| LO | Bundled Standard Line Sharing (Removal of Load Coils, Repeaters, and Excessive Bridge Tap only) |
| Loop Qualified/Authorized |
| 13 | No Conditioning Authorized Loop - Loop is considered to be capable of supporting high ADSL speed and conditioning not needed |
| 32 | No Conditioning Authorized Loop - Loop meets minimum qualification standards for requested PSD |
| HL | Loop qualified for minimum 1.5 Mbps downstream and 384 Kbps upstream (High Speed) |
| HS | Loop qualified for minimum 1.5 Mbps downstream and 384 Kbps (high upstream) |
| LC | Provision loop 'as is' using Yellow Zone Process (YZP) |
| LD | Provision loop 'as is' using Yellow Zone process (YZP) (0-12,000 ft) |
| LE | Provision 'as is' using Yellow Zone Process (YZP) (12,001 - 17,500 ft) |
| LL | Loop qualified for minimum rate 384 Kbps downstream and 128 Kbps upstream (Low Speed) |
| LS | Loop qualified for minimum 384 Kbps downstream and 128 Kbps upstream (low) |
| QX | Authorized 'as is' (loop may require Conditioning to be capable of supporting HFPL, but will take loop as is without conditioning) |
| Loop Not Qualified/Authorized |
| CS | Loop not qualified due to Condition and Load Coil |
| QC | Loop not qualified due to Condition |
| QL | Loop not qualified - length (over 17,500 ft) |
| Equipment Removal (Non-Distance Sensitive) |
| LB | Load Coils, Bridged Taps, and Repeaters must be removed |
| LR | Load Coils and Repeaters must be removed |
| LT | Load Coils and Bridged Tap must be removed |
| LX | Load Coils must be removed |
| TR | Bridged Tap and Repeaters must be removed |
| TX | Bridged Tap must be removed |
| RX | Repeaters must be removed |
| Equipment Removal (0 - 12,000 ft) |
| AA | All Bridged Tap and Load Coils must be removed (0 - 12,000 ft) |
| AL | All Bridged Tap must be removed (0 - 12,000 ft) |
| AX | Repeaters must be removed (0 - 12,000 ft) |
| NB | Non-Excessive Bridged Tap must be removed (0 - 12,000 ft) |
| NX | Excessive Bridged Tap must be removed (0 - 12,000 ft) |
| RR | Excessive Bridged Tap and Repeaters must be removed (0 - 12,000 ft) |
| RT | Load Coils and Bridged Tap must be removed (0 - 12,000 ft) |
| UA | Removal of All Bridged Tap and Repeaters (Loops 0 - 12,000 ft) |
| UX | Load Coils must be removed (0 - 12,000 ft) |
| Equipment Removal (12,001 - 17,500 ft) |
| AB | All Bridged Tap must be removed (12,001 - 17,500 ft) |
| LA | All Bridged Tap and Load Coils must be removed (12,001 - 17,500 ft) |
| RA | All Bridged Tap and Repeaters must be removed (12,001 - 17,500 ft) |
| RB | Non-Excessive Bridged Tap must be removed (12,001 - 17,500 ft) |
| Equipment Removal (over 17,500 ft) |
| 1A | All Incremental Bridged Taps must be removed (over 17,500 ft) |
| 1B | Incremental Load Coils must be removed (over 17,500 ft) |
| 1C | Incremental Repeaters must be removed (over 17,500 ft) |
| 1D | Incremental Excessive Bridged Tap must be removed (over 17,500 ft) |
| 1E | All Incremental Bridged Tap and Load Coils must be removed (over 17,500 ft) |
| 1F | All Incremental Bridged Tap and Repeaters must be removed (over 17,500 ft) |
| 1G | Incremental Load Coils and Bridged Tap must be removed (over 17,500 ft) |
| 1H | Incremental Excessive Bridged Tap and Repeaters must be removed (over 17,500 ft) |
| 1L | Incremental Non-excessive Bridged Tap must be removed (over 17,500 ft) |