MTP

MULTI-POINT INDICATOR

INDICATES:

The intraLATA circuit configuration (i.e., 2 point or multi-point) for a special services circuit.

DATE:

9/25/2008

BILLING:

CRIS and CABS

APPLICATIONS:

General Purpose

SECTION - POSITION

EXAMPLES

IDENT - LH

CAC  C
MTP  YN

IDENT - FL

CAC  C/MTP YN

S&E - FL

ICLS 10.PLXE.123456..NJ/NC UCG-
I1   @@A
ICKL 1-444 HOES LN, PISC, NJ/NCI
     02GS2/LSO 555 732/CAC C/MTP Y
 
                 or

ICLS 10.PLXE.123456..NJ/NC UCG-
I1   @@A
ICKL 1-444 HOES LN, PISC, NJ/NCI
     02GS2/LSO 555 732/CAC N/MTP N

FID RULES/CONSTRAINTS:
  1. Required on all local exchange C orders involving designed special service circuits and non-designed special service circuits which are tracked within the Circuit Provision Center (CPC).
  2. MTP may be used floating in the Identification section only if it applies to all circuits on the order.
  3. Element 1 must reflect the circuit configuration against which this order must be worked. (This includes any orders pending against the circuit with a due date prior to the due date of this order). Corrections against a pre-completion C order should not change the value of MTP.
  4. Element 2 must reflect the circuit configuration after the order is worked.
  5. Not approved for use for Access Service applications.
  6. Section:  IDENT,  Position:  LH, FL
    The absence of an action code infers the presence of an "I" (IN) action code. The I action code is optional on the service order.
  7. T, F, and X order types prohibited for Access Service application.
  8. X action code prohibited on Access Service orders.

SECTION - POSITION

APPEARANCE

MODE

MIN

MAX

IDENT - LH

Required

Alphabetic

1

2

Element: 1

Current Multi-Point/2 Point Indicator

Appearance

Mode

Min

Max

Series

Range

Required

Alphabetic

1

1

No

No

Code Set:
CodeMeaning
NCircuit is a two point circuit
YCircuit is a multi-point circuit

Element: 2

Future Multi-Point/2 Point Indicator

Appearance

Mode

Min

Max

Series

Range

Optional

Alphabetic

1

1

No

No

Code Set:
CodeMeaning
NCircuit is a two point circuit
YCircuit is a multi-point circuit

Element Rules:
Element required only on local C orders when circuit is transitioning from a multi-point to a 2 point and CLCI Segment Name (SGN) is not present.
Element is required only when data entry following the Circuit Activity (CAC) FID is C.

No.

Element Combination

Series

Separator

1.

1

No

2.

1  2

No


SECTION - POSITION

IDENT - FL

Please refer to IDENT - LH for all data requirements.

SECTION - POSITION

S&E - FL

Please refer to IDENT - LH for all data requirements.

ORDER TYPE/ACTION CODE/FID RELATIONSHIPS

Order Section - Position: IDENT - LH

 

Order Type

N

T

F

D

C

R

X

P

A

Presence

O

O

O

O

O

P

O

P

P

Action Codes

I

I

I

I

I

-

I

-

-

CRIS

CABS

Data Retention

No

No

Printed on CSR

No

No

Order Section - Position: IDENT - FL

 

Order Type

N

T

F

D

C

R

X

P

A

Presence

O

O

O

O

O

P

O

P

P

Action Codes

I

I

I

I

I

-

I

-

-

Other FIDs Required Logical Line

CAC

CAC

CAC

CAC

CAC

-

CAC

-

-

CRIS

CABS

Data Retention

No

No

Printed on CSR

No

No

Order Section - Position: S&E - FL

 

Order Type

N

T

F

D

C

R

X

P

A

Presence

O

O

O

O

O

P

O

P

P

Action Codes

I,E

I,E

O,D

O,D

I,O, C,T, X,M, R

-

I,O, C,T

-

-

Other FIDs Required Logical Line

CAC

CAC

CAC

CAC

CAC

-

CAC

-

-

CRIS

CABS

Data Retention

No

No

Printed on CSR

No

No


Note: Please refer to BR-751-000-150 for a complete description of a FID specification and its structure.



iconectiv Confidential - Restricted Access

This document and the confidential information it contains shall not be distributed, routed or made available to any third party, except with written permission of iconectiv.

Licensed Material - Property of iconectiv

Possession and/or use of this material is subject to the provisions of a written license agreement with iconectiv.