FID Specification

MWC

MULTIWAY CALLING

INDICATES:

The Multiway Calling feature name(s) and optional line attributes to be assigned to a line served by a Stored Program Controlled Switch (SPCS).

DATE:

3/16/2006

BILLING:

CRIS and CABS

APPLICATIONS:

5ESS, Access Service, Centrex, DMS-100, EWSD, FETEX-150, ISDN BRI, Open Network Architecture, STROM-DCO, TL1

SECTION - POSITION	EXAMPLES
S&E - LH
	DMS-100 IMWC 3-3WCPUB LPCON.Y, SPTKEY.STAR TL1, FETEX-150 IMWC 28-CTA, CTTL 5ESS IMWC 23-MWCTIA3 NWAYSIZE.6, DIRCONDN .2351941; MWCPD DIRCONDN.2351940; *MWCH2
S&E - FL
	5ESS I1 @@A/TN 732 555-1234/MWC 23 or I1 @@A/TN 732 555-1234 /MWC MWCTIA3 NWAYSIZE.6, DIRCONDN.2351941; MWCPD DIRCONDN .2351940; MWCH2 EWSD* I1 @@E/TN 732 555-6677/MWC CTIGO DMS-100 I1 @@A/TN 732 555-1234/KEY 1/MWC 3WCPUB LPCON.Y, SPTKEY.STAR I1 @@E3W/TN 732 555-1234/KEY 7 TL1, FETEX-150 I1 @@A/TN 732 555-1234/MWC CTFRS FETEX-150 I1 @@A/TN 732 555-1234/MWC CTA, ACH.ACHI FGA I1 @@A/TLI 732 999-1234/TER 001/MWC *MWCTIA1/HML 15

FID RULES/CONSTRAINTS:

ISDN Circuit Switched Bearer Service
Section: S&E Position: FL
For mechanized flow-through, FID may be entered on the FEATURE USOC logical line if one of the following combinations of FIDs appear on the same logical line:
- PN and CAPP (with the CA attribute)
- PN and KEY
- TN and SPID
- TLI, PN and TER
DMS-100
The Three-Way Calling with Public Announcement option is assigned to the primary directory number key (Key 1). The Three-Way Calling option must be assigned to a feature key on the electronic business set.
T, F and X orders types prohibited for Access Service application.
X action code prohibited on Access Service orders.
SERIES AND RANGE ENTRIES - PROCESSING
Service Order Analysis and Control System (SOAC) should process series and range data entries using the DUPLICATE algorithm.

REFERENCES:

5ESS
Lucent Technologies 235-118-257, View 12.19, Keywords FEATURE, DIRCONDN, NWAYSIZE
TL1 (G3.0)
TR-NWT-000199, DNCT View, Keywords CTFRS, CTTL, MWC.
TL1 (G4.0)
TR-NWT-000199, DNCT View, Keywords CTFRS, CTTL, MWC; OEDN View, Keywords CTFRSAM, CTTLAM, MWCAM.
EWSD
Siemens 0625-00670, Call Transfer Features; Siemens 0770-00010, AOCIO, CT, CTATN, CTICS, CTIGO, CTIO, CTO, CTTI.
DMS-100
Northern Telecom Practice 297-2101-808, Option 3WCPUB.

SECTION - POSITION	APPEARANCE	MODE	MIN	MAX
S&E - LH	Required	Alphanumeric	3	49

Element: 1

Multiway Calling Feature List Number

Appearance	Mode	Min	Max	Series	Range
Required	Numeric	1	3	No	No

Data Parameters:

1-999

Element: 2

Multiway Calling Feature Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	8	Yes	No

Element Rules:

Semicolon space is the series separator.

Element: 3

Multiway Calling Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	8	8	No	No

Element: 4

Multiway Calling Attribute Value (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	15	No	No

Element Rules:

When element 4 appears, element 3 is required.

Element: 5

Three-Way Calling with Public Announcement (3WCPUB) Feature Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	6	6	No	No

Code Set:

Code	Meaning
3WCPUB

Element: 6

3WCPUB Loop Console Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	5	5	No	No

Code Set:

Code	Meaning
LPCON

Element: 7

3WCPUB Loop Console Attribute Value (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	1	1	No	No

Code Set:

Code	Meaning
Y	3WCPUB Option is being applied to a Loop Console
N	3WCPUB Option is not being applied to a Loop Console

Element: 8

3WCPUB Split Key Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	6	6	No	No

Code Set:

Code	Meaning
SPTKEY

Element Rules:

Element is required when element 7 code set Y is used.

Element: 9

3WCPUB Split Key Attribute Value (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	4	No	No

Code Set:

Code	Meaning
STAR
OCT

Element Rules:

Element is required when element 8 is used.

Element: 10

Multiway Calling Attribute Name (TL1, FETEX-150)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	6	Yes	No

Code Set:

Code	Meaning
ACH	Add-On Consultation Hold (FETEX-150 Only)
CTA	Call Transfer All (TL1, FETEX-150, DCO)
CTFRS	Call Transfer Fully Restricted (TL1, FETEX-150)
CTIO	Call Transfer Incoming Only (TL1, FETEX-150)
CTIG	Call Transfer Inside Group (TL1, FETEX-150)
CTOG	Call Transfer Outside Group (TL1)
CTIOIG	Call Transfer Incoming Only Inside Group (TL1)
CTAO	Call Transfer Attendant Only (TL1)
CTTL	Call Transfer to TIE Lines (TL1, G3.0)

Element Rules:

When code set CTTL appears, code set CTA, CTIO, or CTIG is required.

Element: 11

Add-on Consultation Hold Attribute Value (FETEX-150)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	4	4	No	No

Code Set:

Code	Meaning
ACHI	Add-on Consultation Hold-Incoming Only

Element: 12

Multiway Calling Feature Name (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	2	5	Yes	No

Code Set:

Code	Meaning
AOCIO	Add On Consultation, Incoming Only
CT	Call Transfer All Calls
CTATN	Call Transfer to Attendant Only
CTICS	Call Transfer Inter-Centrex Screening
CTIGO	Call Transfer Inside Group Only
CTIO	Call Transfer Incoming Only
CTO	Call Transfer Outside
CTTI	Call Transfer Over Tie Line

Element Rules:

Semicolon space is the series separator.

Element: 13

Multiway Calling Feature Name (5ESS)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	8	Yes	No

Code Set:

Code	Meaning
3-Way Calling (Analog)
*MW3WC	Standard (flat rate)
*MWUS3WC	Usage Sensitive
3-Way Calling (ISDN)
*MWI3WC	ISDN Three-Way Calling
3-Way Calling (ISDN Attendant)
*MWIAA3W	Automatic Bridging
*MWIA3WC	1-Way Split Manual Bridging
*MWIAHA3	2-Way Split Hold and Alternate
6-Way Calling - Conference Calling (Analog)
*MW6WC	6-Way Conference Calling
6-Way Calling - Conference Calling (ISDN)
*MWI6WC	ISDN 6-Way Conference Calling
6-Way Flexible Calling (ISDN)
*MWI6WB2	Full Call Transfer
*MWI6WBA	Full Call Transfer Within Intra-Term Group Only
*MWI6WB3	Explicit Call Transfer
*MWI6WBT	Explicit Call Transfer Within Intra-Term Group Only
*MWI6WBN	No Transfer Allowed
Attendant 6-Way Calling (ISDN)
*MWIA6WC	ISDN Attendant 6-Way Calling with 1-Way Split
Call Hold (Analog)
*MWCH1	Call Hold 1 (Dialed Code Access to Another MWC Feature)
*MWCH2	Call Hold 2 (Flash Access to Another MWC Feature)
Add-On Consultation Hold - Incoming Only (Analog)
*MWACH1	Add-On Consultation Hold Incoming Only with Call Hold (*MWCH1)
*MWACH2	Add-On Consultation Hold Incoming Only without Call Hold (*MWCH1)
Add-On Consultation Hold - Incoming Only (ISDN)
*MWIACH	ISDN Add-On Consultation Hold Incoming Only
Call Transfer Individual - All Calls (Analog)
*MWCTIA1	Unrestricted Transfer
*MWCTIA4	Some Restrictions
*MWCTIA5	Like *MWCTIA4 with 50B Attribute Console Capability
*MWCTIA2	More Restrictions
*MWCTIA3	Most Restrictions
Call Transfer Individual - All Calls (ISDN)
*MWICTIA	Unrestricted Transfer
*MWICTOU	Call Transfer - Outside
*MWICTIN	Call Transfer - Inside
Call Transfer Individual - All Calls (ISDN Flexible Calling)
*MWICTA2	Full Call Transfer
*MWICTA3	Explicit Call Transfer
*MWICTA4	Explicit Call Transfer - Internal Only
Call Transfer Individual - Incoming Only (Analog)
*MWCTII1	No restrictions on either leg - use with Call Hold (*MWCH1)
*MWCTII2	No restrictions on either leg - use without Call Hold (*MWCH1)
Call Transfer Individual - Incoming Only (ISDN)
*MWICTI1	No restrictions on either leg
Call Transfer Individual - Incoming Only - Added Leg in same TGID Group (Analog)
*MWCTII3	Use with Call Hold (*MWCH1)
*MWCTII4	Use without Call Hold (*MWCH1)
Call Transfer Individual - Incoming Only - Added Leg in Same TGID Group (ISDN)
*MWICTI2	ISDN Transfer within Terminal Group or with Attendant
Call Transfer - Internal Only (Analog)
*MWCTIO1	Use with Call Hold (*MWCH1)
*MWCTIO2	Use without Call Hold (*MWCH1)
Call Transfer - Internal Only (ISDN)
*MWICTI3	ISDN Added and Transfer within Terminal Group or with Attendant
Call Transfer - Internal Only (ISDN Flexible Calling)
*MWICTA4	Explicit Call Transfer Only
Call Transfer to Attendant (Analog)
*MWCTA1	Use with Call Hold
*MWCTA2	Use without Call Hold
Call Transfer to Attendant (ISDN)
*MWICTAT	Call Transfer Attendant for ISDN
Attendant Position Call Transfer (Analog)
*MWACT1	Without Consultation Hold
*MWACT2	With Consultation Hold (with Another MWC Feature That Has Flash as Entry)
Attendant Position Call Transfer (ISDN)
*MWMFE	Release Link Trunk (RLT)
*MWDTVM	Direct Call Transfer to Voice Mail
Satellite Attendant Transfer (Analog)
*MWSAT1	Attendant Recall From Satellite (Line is in Satellite)
*MWSAT2	Attendant Recall From Satellite with Flash Repeat (Line is in Satellite)
Satellite Attendant Transfer (ISDN)
*MWISAT1	Attendant Recall From Satellite Flash Repeat for ISDN (Line is in Satellite)
Dial Through Attendant (Analog)
*MWDTA1	No Other Call Transfer Feature with Flash as Entry Assigned
*MWDTA2	Another Call Transfer Feature with Flash as Entry Assigned
Bridge from Call Waiting (Analog)
*MWCWAC	All Calls
*MWCWGO	Intragroup Calls Only
*MWCWIG	Intragroup and Attendant Calls
*MWCWIO	Incoming Only Calls
*MWCWNG	Not Intragroup Calls
Bridge from Call Pickup (Analog)
*MWCP	Bridge From Call Pickup
Bridge from Call Pickup (ISDN)
*MWISPU	Bridge From Call Pickup for ISDN
*MWISPUH	Bridge From Call Pickup for ISDN with Held Call

Element Rules:

Lucent has defined most of the popular assignable service features, which are referred to as "pre-constructed" features and are identified on a FID by a mandatory leading asterisk "*". Additionally, system administrators are able to locally customize additional assignable features, which are referred to as "constructible" features. Constructible features are locally developed, do not contain a leading asterisk and have 1-8 character feature names. The Feature field is used to define both "pre-constructed" and "constructible" types of features.

Semicolon space is the series separator.

Element: 14

Multiway Calling Attribute Name (5ESS)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	8	8	No	No

Code Set:

Code	Meaning
DIRCONDN	Direct Connect Directory Number
NWAYSIZE	The maximum number of terminals used in a 3, 4, 5, or 6-way call.

Element: 15

NWAYSIZE Attribute Value (5ESS)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	1	No	No

Data Parameters:

0,3,4,5,6
The switch default is 6.

Element: 16

DIRCONDN Attribute Value (5ESS)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	15	No	No

Data Parameters:

0-9

Symbols:

Asterisk, Number Sign

No.	Element Combination	Series	Separator
1.	1 - 2	No
2.	1 - [ 2 SP [ 3 . 4 , SP ] ; SP ]	No
3.	1 - 5 SP 6 . 7	No
4.	1 - 5 SP 6 . 7 , SP 8 . 9	No
5.	1 - 10	No
6.	1 - 10 . 11	No
7.	1 - 12	No
8.	1 - 13	No
9.	1 - [ 13 SP 14 . 15 ; SP ]	No
10.	1 - [ 13 SP 14 . 15 , SP 14 . 16 ; SP ]	No
11.	1 - [ 13 SP 14 . 16 ; SP ]	No

SECTION - POSITION	APPEARANCE	MODE	MIN	MAX
S&E - FL	Required	Alphanumeric	1	45

Element: 1

Multiway Calling Feature List Number (DMS-100, 5ESS)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	3	No	No

Data Parameters:

1-999

Element Rules:

When element 1 is used, there must be a corresponding LH entry.

Element: 2

Multiway Calling Feature Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	8	Yes	No

Element Rules:

Semicolon space is the series separator.

Applicable to switched access FG A.

Element: 3

Multiway Calling Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	8	8	No	No

Element: 4

Multiway Calling Attribute Value (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	15	No	No

Element Rules:

When element 4 appears, element 3 is required.

Element: 5

Three-Way Calling with Public Announcement (3WCPUB) Feature Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	6	6	No	No

Code Set:

Code	Meaning
3WCPUB	Three-Way Calling with Public Announcement

Element: 6

3WCPUB Loop Console Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	5	5	No	No

Code Set:

Code	Meaning
LPCON	3WCPUB Loop Console

Element: 7

3WCPUB Loop Console Attribute Value (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	1	1	No	No

Code Set:

Code	Meaning
Y	3WCPUB Option is being applied to a Loop Console
N	3WCPUB Option is not being applied to a Loop Console

Element: 8

3WCPUB Split Key Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	6	6	No	No

Code Set:

Code	Meaning
SPTKEY	Split Key

Element Rules:

Element is required when element 7 code set Y is used.

Element: 9

3WCPUB Split Key Attribute Value (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	4	No	No

Code Set:

Code	Meaning
STAR
OCT

Element Rules:

Element is required when element 8 is used.

Element: 10

Multiway Calling Attribute Name (TL1, FETEX-150, DCO)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	6	Yes	No

Code Set:

Code	Meaning
ACH	Add-On Consultation Hold (FETEX-150 Only)
CTA	Call Transfer All (TL1, FETEX-150, DCO)
CTFRS	Call Transfer Fully Restricted (TL1, FETEX-150)
CTIO	Call Transfer Incoming Only (TL1, FETEX-150)
CTIG	Call Transfer Inside Group (TL1, FETEX-150)
CTOG	Call Transfer Outside Group (TL1)
CTIOIG	Call Transfer Incoming Only Inside Group (TL1)
CTAO	Call Transfer Attendant Only (TL1)
CTTL	Call Transfer to TIE Lines (TL1, G3.0)

Element Rules:

When code set CTTL appears, code set CTA, CTIO, or CTIG is required.

Applicable to switched access FG A.

Element: 11

Add-on Consultation Hold Attribute Name (FETEX-150)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	4	4	No	No

Code Set:

Code	Meaning
ACHI	Add-on Consultation Hold-Incoming Only

Element: 12

Multiway Calling Feature Name (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	2	5	Yes	No

Code Set:

Code	Meaning
AOCIO	Add On Consultation, Incoming Only
CT	Call Transfer All Calls
CTATN	Call Transfer to Attendant Only
CTICS	Call Transfer Inter-Centrex Screening
CTIGO	Call Transfer Inside Group Only
CTIO	Call Transfer Incoming Only
CTO	Call Transfer Outside
CTTI	Call Transfer Over Tie Line

Element Rules:

Semicolon space is the series separator.

Applicable to switched access FG A.

Element: 13

Multiway Calling Feature Name (5ESS)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	8	Yes	No

Code Set:

Code	Meaning
3-Way Calling (Analog)
*MW3WC	Standard (flat rate)
*MWUS3WC	Usage Sensitive
3-Way Calling (ISDN)
*MWI3WC	ISDN Three-Way Calling
3-Way Calling (ISDN Attendant)
*MWIAA3W	Automatic Bridging
*MWIA3WC	1-Way Split Manual Bridging
*MWIAHA3	2-Way Split Hold and Alternate
6-Way Calling - Conference Calling (Analog)
*MW6WC	6-Way Conference Calling
6-Way Calling - Conference Calling (ISDN)
*MWI6WC	ISDN 6-Way Conference Calling
6-Way Flexible Calling (ISDN)
*MWI6WB2	Full Call Transfer
*MWI6WBA	Full Call Transfer Within Intra-Term Group Only
*MWI6WB3	Explicit Call Transfer
*MWI6WBT	Explicit Call Transfer Within Intra-Term Group Only
*MWI6WBN	No Transfer Allowed
Attendant 6-Way Calling (ISDN)
*MWIA6WC	ISDN Attendant 6-Way Calling with 1-Way Split
Call Hold (Analog)
*MWCH1	Call Hold 1 (Dialed Code Access to Another MWC Feature)
*MWCH2	Call Hold 2 (Flash Access to Another MWC Feature)
Add-On Consultation Hold - Incoming Only (Analog)
*MWACH1	Add-On Consultation Hold Incoming Only with Call Hold (*MWCH1)
*MWACH2	Add-On Consultation Hold Incoming Only without Call Hold (*MWCH1)
Add-On Consultation Hold - Incoming Only (ISDN)
*MWIACH	ISDN Add-On Consultation Hold Incoming Only
Call Transfer Individual - All Calls (Analog)
*MWCTIA1	Unrestricted Transfer
*MWCTIA4	Some Restrictions
*MWCTIA5	Like *MWCTIA4 with 50B Attribute Console Capability
*MWCTIA2	More Restrictions
*MWCTIA3	Most Restrictions
Call Transfer Individual - All Calls (ISDN)
*MWICTIA	Unrestricted Transfer
*MWICTOU	Call Transfer - Outside
*MWICTIN	Call Transfer - Inside
Call Transfer Individual - All Calls (ISDN Flexible Calling)
*MWICTA2	Full Call Transfer
*MWICTA3	Explicit Call Transfer
*MWICTA4	Explicit Call Transfer - Internal Only
Call Transfer Individual - Incoming Only (Analog)
*MWCTII1	No restrictions on either leg - use with Call Hold (*MWCH1)
*MWCTII2	No restrictions on either leg - use without Call Hold (*MWCH1)
Call Transfer Individual - Incoming Only (ISDN)
*MWICTI1	No restrictions on either leg
Call Transfer Individual - Incoming Only - Added Leg in same TGID Group (Analog)
*MWCTII3	Use with Call Hold (*MWCH1)
*MWCTII4	Use without Call Hold (*MWCH1)
Call Transfer Individual - Incoming Only - Added Leg in same TGID Group (ISDN)
*MWICTI2	ISDN Transfer within Terminal Group or with Attendant
Call Transfer - Internal Only (Analog)
*MWCTIO1	Use with Call Hold (*MWCH1)
*MWCTIO2	Use without Call Hold (*MWCH1)
Call Transfer - Internal Only (ISDN)
*MWICTI3	ISDN Added and Transfer within Terminal Group or with Attendant
Call Transfer - Internal Only (ISDN Flexible Calling)
*MWICTA4	Explicit Call Transfer Only
Call Transfer to Attendant (Analog)
*MWCTA1	Use with Call Hold
*MWCTA2	Use without Call Hold
Call Transfer to Attendant (ISDN)
*MWICTAT	Call Transfer Attendant for ISDN
Attendant Position Call Transfer (Analog)
*MWACT1	Without Consultation Hold
*MWACT2	With Consultation Hold (with Another MWC Feature That Has Flash as Entry)
Attendant Position Call Transfer (ISDN)
*MWMFE	Release Link Trunk (RLT)
*MWDTVM	Direct Call Transfer to Voice Mail
Satellite Attendant Transfer (Analog)
*MWSAT1	Attendant Recall From Satellite (Line is in Satellite)
*MWSAT2	Attendant Recall From Satellite with Flash Repeat (Line is in Satellite)
Satellite Attendant Transfer (ISDN)
*MWISAT1	Attendant Recall From Satellite Flash Repeat for ISDN (Line is in Satellite)
Dial Through Attendant (Analog)
*MWDTA1	No Other Call Transfer Feature with Flash as Entry Assigned
*MWDTA2	Another Call Transfer Feature with Flash as Entry Assigned
Bridge from Call Waiting (Analog)
*MWCWAC	All Calls
*MWCWGO	Intragroup Calls Only
*MWCWIG	Intragroup and Attendant Calls
*MWCWIO	Incoming Only Calls
*MWCWNG	Not Intragroup Calls
Bridge from Call Pickup (Analog)
*MWCP	Bridge From Call Pickup
Bridge from Call Pickup (ISDN)
*MWISPU	Bridge From Call Pickup for ISDN
*MWISPUH	Bridge From Call Pickup for ISDN with Held Call

Element Rules:

Semicolon space is the series separator.

Element: 14

Multiway Calling Attribute Name (5ESS)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	8	8	No	No

Code Set:

Code	Meaning
DIRCONDN	Direct Connect Directory Number
NWAYSIZE	The maximum number of terminals used in a 3, 4, 5, or 6-way call.

Element: 15

NWAYSIZE Attribute Value (5ESS)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	1	No	No

Data Parameters:

0,3,4,5,6
The switch default is 6.

Element: 16

DIRCONDN Attribute Value (5ESS)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	15	No	No

Data Parameters:

0-9

Symbols:

Asterisk, Number Sign

No.	Element Combination	Series	Separator
1.	1	No
2.	2	Yes	; SP
3.	2 SP [ 3 . 4 , SP ]	Yes	; SP
4.	5 SP 6 . 7	No
5.	5 SP 6 . 7 , SP 8 . 9	No
6.	10	Yes	, SP
7.	10 . 11	No
8.	12	Yes	; SP
9.	13	Yes	; SP
10.	13 SP 14 . 15	Yes	; SP
11.	13 SP 14 . 15 , SP 14 . 16	Yes	; SP
12.	13 SP 14 . 16	Yes	; SP

ORDER TYPE/ACTION CODE/FID RELATIONSHIPS

Order Section - Position: S&E - LH

Order Type	N	T	F	D	C	R	X	P	A
Presence	O	O	O	O	O	O	O	P	P
Action Codes	I,E	I,E	O,D	O,D	I,O, C,T, E,D, R	I,O, C,T, E,D, R	I,O	-	-

	CRIS	CABS
Data Retention	Yes	No
Printed on CSR	Yes	No

Order Section - Position: S&E - FL

Order Type	N	T	F	D	C	R	X	P	A
Presence	O	O	O	O	O	O	O	P	P
Action Codes	I,E	I,E	O,D	O,D	I,O, C,T, E,D, M,X, R	I,O, C,T, E,D, M,X, R	I,O, C,T, R	-	-

	CRIS	CABS
Data Retention	Yes	Yes
Printed on CSR	Yes	Yes

Note: Please refer to BR-751-000-150 for a complete description of a FID specification and its structure.

iconectiv Confidential - Restricted Access

This document and the confidential information it contains shall not be distributed, routed or made available to any third party, except with written permission of iconectiv.

Licensed Material - Property of iconectiv

Possession and/or use of this material is subject to the provisions of a written license agreement with iconectiv.