FID Specification

QP	QUEUE PARAMETERS

INDICATES:

The Queue features and parameters.

DATE:

6/18/2009

BILLING:

CRIS and CABS

APPLICATIONS:

5ESS, Access Service, Centrex, DMS-100, EWSD, FETEX-150, ISDN BRI, Open Network Architecture, SanteraOne, TL1

SECTION - POSITION	EXAMPLES
S&E - FL
	5ESS Multi-Line Hunt Group IHML 5-TER H1-20/HTY MHU/QP QLCWLDA IHML 10-TER H1-15/HTY MHU/QP QL BASICSIZE.10, EXTENDEDSIZE.5, POSTQTREAT.REORDER DMS-100 Single Line Queueing I1 @@A/TN 732 555-1234/PN 732 555-1234 /CAT 3/CTX ACME1:3/KEY 1 I1 @@A/TN 732 555-3949/PN 732 555-1234/KEY 2 I1 @@E/KEY 5/PN 732 555-1234/QP SLQ SLQDN.5553949, SIZE.6, BLG.Y, ANN.Y, TIME.8, GRP.AUDIO1, RTE. IBNRTE 2 DMS-100 Single Line Queueing (P-Phone) I1 @@E/KEY 5/TN 732 555-1234/PN 732 555-1234 /QP SLQ SIZE.6, BLG.Y, ANN.Y, TIME.8, GRP.AUDIO1, RTE.IBNRTE 2, SLQDNK.6 /DSA FK EWSD MLHG Queuing of Incoming Calls IHML 4-TER H1-10/HTY RG/QP ACCTNG or IHML 9-TER H1-20/HTY RG/QP POTSQ QTYPE.DN-5551234, DEST. 5553400, THNOTF.10-15, NOTIFY.2550-7-15-7, CXGRP.4 Outgoing Facility Group Queuing I1 @@A/TN 732 555-1234/QP RBQ, PQRR FGA Number of Calls Allowed in Queue I1 @@E/TN 732 555-1234/QP 0025 TL1 MLHG Queuing of Incoming Calls IHML 2-TER H1-4/HTY CIR/QP QUE /SP QLAMP1.2040-3-2-4: QLAMP2. 2040-3-3-5 ISDN MLHG Queing of Incoming Calls with Call Waiting Reports IHML 20-TER H1-3/HTY RG/TLI 732 555-1234 /QP QUE CWR, QS.2 I1 @@F/CLS10.IBMX.1223456..NJ/BS DMD DMD SX/BCN SP 3AU 56C I1 @@W/TSPD 732 555-1234-001-1 /TN 732 555-1234/DSNA10.IBMX.123456..NJ /PN 732 555-1234/TCGN MGR/QP CWRT 20/TER 1/TLI 732 555-1234/HML 20 Outgoing Facility Group Queuing I1 @@A/TN 732 555-3324/QP OHQ QPL.HI FETEX-150 I1 @@V/TN 732 555-3000/QP RBQ OGP.PRL SanteraOne MLHG Queing of Incoming Calls IHML 2-TER HI-4 /HTY RG/QP QUE

FID RULES/CONSTRAINTS:

5ESS
QP is entered on left hand Hunting-Multiline Group Number (HML) logical line.
T, F, and X order types prohibited for Access Service application.

REFERENCES:

TL1
TR-NWT-000199, DNCT View, Keyword QS; Subscriber Lines View, Keywords OFGQ and QPL; MLHG View, Keywords CWR and QUE; TSP View, Keyword CWRT
EWSD
Siemens 0625-00070, Hunting Features; 0625-01050, Outgoing Facility Group Queuing; 0625-01010, Call Distribution Features; Siemens 0770-00010, QTYPE, DEST, THNOTF, NOTIFY, CXGRP, OHQ, RBQ, PQ, PQRR, and PQRFRL
DMS-100
NORTEL Document 297-8021-808, Option SLQ
DMS-100 P-Phone
NORTEL Document 297-8001-808, Option SLQ
SanteraOne
Santera Systems Inc., DNCT View, Keyword QUE
5ESS
Lucent Technologies 235-118-257, View 3.5, 3.40, Keywords ANNCBILL, BASICSZ, EGRQNUMTRKGRPS, EGRQTIMEOUT, EGRQSIZE, EXTENDSZ, GRPNUM, GRPTYPE, MEMB, MODULE, OFCQNUMTRKGRPS, OFCQTIMEOUT, OFCQSIZE, POST, PQSIZE, PRIQTOUT, PSTQRT, QMONTHRESHOLD, QWARNTHRESHOLD, RETRYOUT, RNGBACK, RNGBCKINT, ROUQTOUT, SADA, SERVPRT, TGN

SECTION - POSITION	APPEARANCE	MODE	MIN	MAX
S&E - FL	Required	Alphanumeric	1	94

Element: 1

Queue Parameters Feature Name (5ESS)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	8	No	No

Code Set:

Code	Meaning
*QISATCWL	Queuing for IISDN Attendant (ISAT) Multi-line Hunt Groups with Call Waiting Lamps
*QISCWL	Queuing for ISDN Multi-line Hunt Groups with Call Waiting Lamps
*QL	Queuing for Multi-line Hunt Groups
*QLCSD	Circuit-Switched Data (CSD) Queuing for Multi-line Hunt Groups
*QLCWL	Queuing for Multi-line Hunt Groups with Call Waiting Lamps
*QLCWLDA	Queuing for Multi-line Hunt Groups with Call Waiting Lamps and Delay Announcements
*QLDA	Queuing for Multi-line Hunt Groups with Delay Announcements
*QSOH	Off-Hook Queuing for Simulated Facilities Groups (SFGs)
*QSOHP	Off-Hook Queuing for Simulated Facilities Groups (SFGs) with Priority Queue
*QSOHPD	Off-Hook Queuing for Simulated Facilities Groups (SFGs) with Priority Queue and Priority Announcements
*QSRB	Ringback Queuing for Simulated Facilities Groups (SFGs)
*QSRBP	Ringback Queuing for Simulated Facilities Groups (SFGs) with Priority Queue
*QTACCS	Digital Services Unit (DSU) Queuing for Trunk Groups
*QTBLV	Busy Line Verify (BLV) Queuing for Trunk Groups
*QTOH	Off-Hook Queuing for Trunk Groups
*QTOHP	Off-Hook Queuing for Trunk Groups with Priority Queue
*QTOHPD	Off-Hook Queuing for Trunk Groups with Priority Queue and Priority Announcements
*QTRB	Ringback Queuing for Trunk Groups
*QTRBP	Ringback Queuing for Trunk Groups with Priority Queue

Symbols:

Asterisk

Element Rules:

Lucent has defined most of the popular assignable service features, which are referred to as “pre-constructed” features and are identified on a FID by a mandatory leading asterisk “*”. Additionally, system administrators are able to locally customize additional assignable features, which are referred to as “constructible” features. Constructible features are locally developed, do not contain a leading asterisk and have 1-8 character feature names. The Feature field is used to define both “pre-constructed” and “constructible” types of features.

Element: 2

Queue Parameters Attribute Name (5ESS)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	14	No	No

Code Set:

Code	Meaning
ANNCBILL	Bill Announcement
BASICSZ	Basic size of the calls queued
EGRQNUMTRKGRPS	Maximum number of trunk groups with GETS egress queuing calls queued
EGRQTIMEOUT	Maximum number of seconds a call can remain in GETS egress queuing
EGRQSIZE	Number of queue slots available in GETS oegress queuing
EXTENDSZ	Extended size of the queue
GRPNUM	Group Number
GRPTYPE	Group Type
MEMB	Trunk group member number for music source
MODULE	Switching module on which queuing resides
OFCQNUMTRKGRPS	Maximum number of trunk groups with GETS office queuing calls queued
OFCQTIMEOUT	Maximum number of seconds a call can remain in GETS office queuing
OFCQSIZE	Number of queue slots available in GETS office queuing
POST	Post Delay tones
PQSIZE	Size of the priority section of the queue size
PRIQTOUT	Maximum time a priority call can remain in queue
PSTQTRT	Queue timeout post routing treatment
QMONTHRESHOLD	Threshold warning value for non-ISAT MLHG queue monitored by a DSL queue monitor
QWARNTHRESHOLD	Threshold value for activating Queue Warning Feature Button lamp
RETRYOUT	Retry timeout in seconds for attempting to ring back off-hook customers in a ring back queue
RNGBACK	Distinctive ringing pattern for queue feature
RNGBCKINT	The time limit for ringing back customers in the queue
ROUQTOUT	Maximum time a routine call can remain in queue
RQSIZE	Size of the routine section of the queue
SADA	Activate service after delay announcement
SERVPRT	Service Protection Time Delay (in seconds)
TGN	Trunk group number for music source

Element: 3

Queue Parameters Attribute Value (5ESS)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic or Numeric	1	7	No	No

Code Set:

Code	Meaning
GRPTYPE Attribute Value
LINE	Line
SFG	Simulated Facilities
TRK	Trunk

SADA, ANNCBILL Attribute Value
Y	Yes
N	No

POST Attribute Value
AUD	Audible
MUS	Music
IDLE	Idle

RNGBACK Attribute Value
A	2 seconds on, 4 seconds off
B	0.8 seconds on, 0.4 seconds off, 0.8 seconds on, 4 seconds off
C	0.4 seconds on, 0.2 seconds off, 0.4 seconds on, 0.2 seconds off, 0.8 seconds on, 4 seconds off
D	1 second on, 1 second off, 1 second on, 3 seconds off
P	1640 milliseconds on, 360 milliseconds off

PSTQTRT Attribute Value
ALTR	Alternate treatment
REORDER	Reorder tone

Data Parameters:

GRPNUM Attribute Value
1-8191	Line Group Type
1-2000	Simulated Facilities Group Type
0-4000	Trunk Group Type

BASICSZ, EXTENDSZ, QMONTHRESHOLD Attribute Value
0-255

MODULE Attribute Value
1-192

TGN Attribute Value
1-4000

MEMB Attribute Value
1-1951

QWARNTHRESHOLD Attribute Value
1-254

RQSIZE, PQSIZE Attribute Value
0-255

RNGBCKINT Attribute Value
18, 24, 30, 36, 42 , 48

RETRY Attribute Value
0-1023

ROUQTOUT, PRIQTOUT Attribute Value
0-4095

SRVPRT Attribute Value
0-2047

OFCQNUMTRKGRPS, EGRQNUMTRKGRPS Attribute Value
0-500

OFCQTIMEOUT, EGRQTIMEOUT Attribute Value
0-90

OFCQSIZE, EGRQSIZE Attribute Value
0-255	default is 5

Element: 4

Queue Name (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	8	2	No

Symbols:

Hyphen

Element Rules:

A priority value may be added to the queue name following a hyphen.

If SFG or TGRP is Ringback or Off-Hook Queuing, only one queue name is allowed.

If Priority Queuing is used for SFG or TGRP, then two queue names must be entered--one for High Priority Queue and one for Low Priority Queue.

Element: 5

Queue Assignment Attribute Name (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	4	6	No	No

Code Set:

Code	Meaning
QTYPE	Type of Queue Assignment
DEST	Destination Server of Queue
THNOTF	Notification Time Thresholds
NOTIFY	Notify Equipment Numbers
CXGRP	Centrex Group Number

Element Rules:

Code set NOTIFY is required when code set THNOTF appears.

The CXGRP is required if the MLHG specified for assignment is Centrex.

Element: 6

Type of Queue Assignment Attribute Value (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	2	5	No	No

Code Set:

Code	Meaning
CORCL	Campon Recalls (MLHG)
DN	Directory Number (MLHG)
INC	Intercepted Calls (MLHG)
IWDN	INWATS Directory Number (MLHG)
SFG	Simulated Facility Group (OFGQ)
TGRP	Trunk Group (OFGQ)

Element Rules:

Element 6 is required when element 5 code set QTYPE appears.

The only trunk types allowed for TGRP are TIE or FX. The only types allowed for SFG are OUTWATS or OUTGOING.

Element: 7

Alternate Pilot DN Attribute Value (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	7	7	No	No

Element Rules:

Element 7 is required when element 6 code set DN or IWDN appears.

Element: 8

Destination Server of Queue Attribute Value (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	4	7	No	No

Element Rules:

Element 8 is required when element 5 code set DEST appears.

Dependent on QTYPE, this element will reflect either the Pilot DN of the MLHG or the SFG or TGRP for the OFGQ.

Element: 9

Notification Time Thresholds - High Threshold Attribute Value (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	3	No	No

Code Set:

Code	Meaning
5-255	High Threshold Value

Element Rules:

Code set is valid in increments of 5 only.
Element 9 is required when element 5 code set THNOTF appears.

Element: 10

Notification Time Thresholds - Low Threshold Value (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	3	No	No

Code Set:

Code	Meaning
5-255	Low Threshold Value

Element Rules:

Code set is valid in increments of 5 only.
10 is required when element 5 code set THNOTF appears.

Element: 11

Notify Equipment DLU Number Attribute Value (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	4	4	No	No

Data Parameters:

0010-2550

Element Rules:

Element 11 is required when element 5 code set NOTIFY appears.

Element: 12

Notify Equipment Shelf Number Attribute Value (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	1	No	No

Data Parameters:

0-7

Element Rules:

Element 12 is required when element 5 code set NOTIFY appears.

Element: 13

Notify Equipment Module Number Attribute Value (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	2	2	No	No

Data Parameters:

00-15

Element Rules:

Element 13 is required when element 5 code set NOTIFY appears.

Element: 14

Notify Equipment Circuit Number Attribute Value (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	1	No	No

Data Parameters:

0-7

Element Rules:

Element 14 is required when element 5 code set NOTIFY appears.

Element: 15

Centrex Group Number Attribute Value (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	4	No	No

Data Parameters:

1-9999

Element Rules:

Element 15 is required when element 5 code set CXGRP appears.

Element: 16

Outgoing Facility Group Queuing Feature Name (EWSD)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	2	6	2	No

Code Set:

Code	Meaning
OHQ	Off-Hook Queuing
RBQ	Ringback Queuing
PQ	Priority Queuing
PQRR	Post-Queue Routing
PQRFRL	Post-Queue Routing with FRL

Element Rules:

Code sets OHQ, RBQ, and PQ are mutually exclusive.

Code sets PQRR, and PQRFRL are mutually exclusive.

Element: 17

Number Calls In Queue (FGA)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	4	No	No

Data Parameters:

1-9999
0001-9999

Element Rules:

Applicable to switched access FGA.

Element: 18

Multiline Hunt Group Queue Feature Name (TL1, SanteraOne)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	4	No	No

Code Set:

Code	Meaning
CWRT	Calls Waiting Reports Terminals (TL1)
QUE	Queuing (TL1)

Element: 19

Calls Waiting Reports Terminals MLHG Number Attribute Name (TL1)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	4	Yes	Yes

Data Parameters:

1-2047

Element: 20

Multiline Hunt Group Queue Attribute Name (TL1)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	2	3	Yes	No

Code Set:

Code	Meaning
CWR	Calls Waiting Reports
QS	Queue Size

Element: 21

Queue Size Attribute Value (TL1)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	2	No	No

Data Parameters:

1-99

Element Rules:

Element is required when element 20 code set QS appears.

Element: 22

Outgoing Facility Group Queueing Feature Name (TL1, FETEX-150)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	4	No	No

Code Set:

Code	Meaning
OHQ	Off Hook Queueing
RBQ	Ring Back Queueing
BOTH	Off Hook and Ring Back Queueing (TL1 Release G3.0 and later)

Element Rules:

When element 22 code sets appear, the OFGQ keyword in the TL1 and FETEX-150 switches is inferred.

Element: 23

Queueing Priority Level Attribute Name

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	3	No	No

Code Set:

Code	Meaning
QPL	Queueing Priority Level (TL1)
OGP	Outgoing Restriction Priority (FETEX-150)

Element: 24

Queueing Priority Level Attribute Value (TL1)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	2	2	No	No

Code Set:

Code	Meaning
HI	High Priority
LO	Low Priority

Element Rules:

The switch default is LO.

A data entry is not required when the switch default applies on initial installation of the feature.

Subsequent changes to existing features require a data entry even when the default value applies.

Element: 25

Outgoing Restriction Priority Attribute Value (FETEX-150)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	3	No	No

Code Set:

Code	Meaning
PRL	Priority Low
PRM	Priority Middle
PRH	Priority High

Element: 26

Single Line Queueing (SLQ) Feature Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	3	No	No

Code Set:

Code	Meaning
SLQ	Single Line Queueing

Element: 27

SLQ Directory Number Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	5	5	No	No

Code Set:

Code	Meaning
SLQDN	Single Line Queueing Directory Number

Element: 28

SLQ Directory Number Attribute Value (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	7	7	No	No

Element: 29

SLQ Queue Size Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	4	4	No	No

Code Set:

Code	Meaning
SIZE	Queue Size

Element: 30

SLQ Queue Size Attribute Value (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	2	No	No

Data Parameters:

1-15

Element: 31

SLQ Delayed Billing Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	3	No	No

Code Set:

Code	Meaning
BLG	Delayed Billing

Element: 32

SLQ Delayed Billing Attribute Value (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	1	1	No	No

Code Set:

Code	Meaning
Y	Yes
N	No

Element: 33

SLQ Announcement Music Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	3	No	No

Code Set:

Code	Meaning
ANN	Announcement Music

Element: 34

SLQ Announcement Music Attribute Value (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	1	1	No	No

Code Set:

Code	Meaning
Y	Yes
N	No

Element: 35

SLQ Ringing Time In Seconds Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	4	4	No	No

Code Set:

Code	Meaning
TIME	Ring Time

Element: 36

SLQ Ringing Time In Seconds Attribute Value (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	2	No	No

Data Parameters:

1-20

Element: 37

SLQ Audio Groups Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	3	No	No

Code Set:

Code	Meaning
GRP	Audio Group

Element: 38

SLQ Audio Group Attribute Value (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	1	8	No	No

Element: 39

SLQ Overflow Route Attribute Name (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	3	3	No	No

Code Set:

Code	Meaning
RTE	Overflow Route

Element: 40

SLQ Overflow Route Reference Table Identifier Attribute Value 1 (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Alphanumeric	4	6	No	No

Code Set:

Code	Meaning
IBNRTE
IBNRT2
IBNRT3
OFRT
OFR2
OFR3
OFR4
RRTE
TTL4

Element: 41

SLQ Overflow Route Attribute Value 2 (DMS-100)

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	4	No	No

Data Parameters:

1-1023

Element: 42

Overflow Directory Number Attribute Name

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	4	4	No	No

Code Set:

Code	Meaning
OVDN	Overflow Directory Number to which calls are routed

Element Rules:

Required only if Overflow Type equals D.

Element: 43

Overflow Directory Number Attribute Value

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	2	No	No

Data Parameters:

1-11

Element: 44

SLQ Directory Number Key Attribute Name

Appearance	Mode	Min	Max	Series	Range
Optional	Alphabetic	6	6	No	No

Code Set:

Code	Meaning
SLQDNK	Single Line Queue Directory Number Key

Element: 45

SLQ Directory Number Key Attribute Value

Appearance	Mode	Min	Max	Series	Range
Optional	Numeric	1	2	No	No

Data Parameters:

1-69

No.	Element Combination	Series	Separator
1.	1	No
2.	1 SP [ 2 . 3 , SP ]	No
3.	4	2	, SP
4.	4 SP 5 . 6 , SP 5 . 8	No
5.	4 SP 5 . 6 , SP 5 . 8 , SP 5 . 9 - 10 , SP 5 . 11 - 12 - 13 - 14	No
6.	4 SP 5 . 6 , SP 5 . 8 , SP 5 . 9 - 10 , SP 5 . 11 - 12 - 13 - 14 , SP 5 . 15	No
7.	4 SP 5 . 6 , SP 5 . 8 , SP 5 . 15	No
8.	4 SP 5 . 6 - 7 , SP 5 . 8	No
9.	4 SP 5 . 6 - 7 , SP 5 . 8 , SP 5 . 9 - 10 , SP 5 . 11 - 12 - 13 - 14	No
10.	4 SP 5 . 6 - 7 , SP 5 . 8 , SP 5 . 9 - 10 , SP 5 . 11 - 12 - 13 - 14 , SP 5 . 15	No
11.	4 SP 5 . 6 - 7 , SP 5 . 8 , SP 5 . 15	No
12.	16	2	, SP
13.	17	No
14.	18	No
15.	18 SP 19	No
16.	18 SP 20	No
17.	18 SP 20 . 21	No
18.	22	No
19.	22 SP 23 . 24	No
20.	22 SP 23 . 25	No
21.	26 SP 27 . 28 , SP 29 . 30 , SP 31 . 32 , SP 33 . 34 , SP 35 . 36 , SP 37 . 38 , SP 39 . 40 SP 41	No
22.	26 SP 29 . 30 , SP 31 . 32 , SP 33 . 34 , SP 35 . 36 , SP 37 . 38 , SP 39 . 40 SP 41 , SP 44 . 45	No
23.	26 SP 29 . 30 , SP 31 . 32 , SP 33 . 34 , SP 35 . 36 , SP 37 . 38 , SP 42 . 43 , SP 44 . 45	No

ORDER TYPE/ACTION CODE/FID RELATIONSHIPS

Order Section - Position: S&E - FL

Order Type	N	T	F	D	C	R	X	P	A
Presence	O	O	O	O	O	O	O	P	P
Action Codes	I	I	O	O	I,O, C,T	I,O, C,T	I,O	-	-

	CRIS	CABS
Data Retention	Yes	Yes
Printed on CSR	Yes	Yes

Note: Please refer to BR-751-000-150 for a complete description of a FID specification and its structure.

iconectiv Confidential - Restricted Access

This document and the confidential information it contains shall not be distributed, routed or made available to any third party, except with written permission of iconectiv.

Licensed Material - Property of iconectiv

Possession and/or use of this material is subject to the provisions of a written license agreement with iconectiv.